gom06 6 way solid state

GOM06 6-way solid state relay module / high level trigger 48V 1A optocoupler isolated output voltage conversion

Description:

Theory: Time Relay

Model Number: GOM06

GOM06 solid state relay control module, using high level signal trigger, only need 0.1mA trigger current to drive solid state relay with 1A control capacity. The module uses genuine high quality components, red and blue signal indicator, industrial grade double sided PCB sheet and board are considered comprehensive and stable in performance.

GOM06 solid state relay module, the output end of the small resistance, non-polarity, can replace the contacts of the electromagnetic relay, and has the characteristics of small control current, fast action time, long working life, etc., can be widely used in various power or signal control applications. .

Module description

1. The module is powered by a wide voltage DC5-32V;

2, rated load capacity: DC / AC: 0-40V / 0.5A; peak load capacity 0-48V / 1A (within 100ms)

3, the module uses high level control, the trigger current only needs 0.1mA;

4, the module built-in current limiting resistor, you can directly use the positive control of the power supply, you can also use the I / O port control of the microcontroller;

5. The module has 1 channel, 2 channel, 4 channel, 6 channel and 8 channel modules to choose from;

6, with power supply anti-reverse function, connected to the power supply will not damage the module;

7, with power indicator (red) and relay status indicator for each channel (blue)

8, module size: 7.6cm * 5.3m * 1.0cm (length * width * height)

9, with 4 3mm fixing bolt holes for easy installation

Module interface

Module control terminal: 8-wire interface, all interfaces have terminal blocks for user wiring

1, DC+: external DC power supply positive (DC 5V-32V)

2, DC-: external DC power supply negative

3, X1-X6: relay control interface, the relay is closed when the level is high (3V-30V), the relay is disconnected when the level is low (less than 2V), the trigger current only needs 0.1mA

Relay output: 12-wire interface, all interfaces have terminal blocks for easy wiring

1, NO1--NO6: relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with CM

2, CM1--CM6: relay common interface